Viqua VT1-DWS (120v)

Brand: Ampac USA
Product Code: VT1-DWS
Made in USA
qrcode

Viqua VT1-DWS Copper Series UV System Powered By Sterilight 1 GPM.

The Viqua Copper Series VT1-DWS Ultraviolet Drinking Water System provides a point-of-use water treatment system with both disinfection and filtration. The VT1-DWS is ideal for point of use applications such as under the sink, in a basement or other locations, depending on available space. Ultra Violet disinfectant System provides the best solution

  • Inlet Connection: 1/4" quick connect
  • Outlet Connection: 3/8" quick connect
  • This compact unit incorporates Viqua Copper disinfection system and two filter housings, all on the same installation bracket
  • The Viqua VT1 provides point-of-use disinfection with a flow rate of 1 gpm at a 30 mJ/cm²dose (0.7 gpm if a dose of 40 mJ/cm² is required.)
  • This modular system, incorporating the new Copper controller, is ideal for any application requiring a high flow rate in a compact space
  • The VT-1 is manufactured with a polished, 304 stainless steel axial flow reactor
  • Lamp change is easily accomplished without interrupting the water flow, or having to drain the reactor and the  connector can be removed without any additional tools

Operating Conditions

Flow Rate (16mJ/cm2 Dose)2 gpm
Flow Rate (30mJ/cm2 Dose)1 gpm
Flow Rate (40mJ/cm2 Dose)0.7 gpm
Ambient Temperature36-104 °F
Operating Pressure Range125 max psi

Dimensions

Overall Dimensions15" x 17" x 16" inches
Inlet1/4" quick connect
Outlet3/8" quick connect "
Chamber Length12.5 "
Chamber Diameter2.5 "

Electrical

Voltage120 V
Frequency50-60 Hz
Power Consumption13 W

General

Number of Lamps1
Chamber Material304 Stainless Steel Reactor
Other FeaturesVisual Power On
Write Your Own Review
You're reviewing:Viqua VT1-DWS (120v)
Your Rating
Citytech Copyright